OneSource Professional Training Solutions, Inc. presents
 

OMSTP2 - Cisco ONS 15454 Multiservice Transport Platform (MSTP) Advanced Topics and Data v9.2 - Optical On-Site Training

OMSTP2 - Cisco ONS 15454 Multiservice Transport Platform (MSTP) Advanced Topics and Data v9.2 - Optical

Course Description/Agenda

In this lab-intensive course, get an introduction to the data features and functions of Cisco ONS 15454 Multiservice Transport Platform (MSTP) dense wavelength-division multiplexing (DWDM) Release 9.2. You will learn the important theoretical concepts that underlie data encapsulation and how the concepts are put to use in the Cisco ONS 15454 MSTP system. Gain practical knowledge and skills to successfully deploy data over DWDM in your network. Learn to determine which MSTP cards to use based on your network requirements.

You will configure a six-node mesh network. The mesh capability of the Cisco MSTP allows up to eight spans of 40 or 80 channels to be connected together under system control. You will learn how the TDM network can be "tied" to the DWDM network using provisionable patch cords, and you will examine ADM10G within the DWDM network.

In twelve hands-on labs, you will learn to configure Cisco Transport Control, WXC-based DWDM Mesh network, 2.5 Gigabit transponders, 2.5 Gigabit and 10 Gigabit data cards, Gigabit Ethernet and 10 Gigabit Ethernet crossponders, and 10 Gigabit Add-Drop Multiplexer (ADM-10G). You'll also review G.709 encapsulation, G.7041 Generic Framing Protocol (GFP), forward error correction, and Ethernet. You will learn to install provisionable patch cords, create a TDM network through the DWDM, and show the integrated TDM/DWDM circuit records. You will also create dual and single ADM10G subnetworks, and then you'll create DS3 and GigE circuits through them.

This course combines lecture materials and hands-on labs throughout to ensure that you are able to successfully deploy a Cisco ONS 15454 MSTP data over DWDM network.

What You'll Learn

• How the Cisco MSTP WXC-based mesh network is configured and operates
• Major features and benefits of the Cisco ONS 15454 MSTP data cards
• Major features and benefits of a Cisco ONS 15454 MSTP system for data over DWDM
• Configure the 2.5 Gigabit transponder, 2.5 Gigabit and 10 Gigabit data cards, and Gigabit Ethernet and 10 Gigabit Ethernet crossponders with G.709 options
• Configure 2.5 Gigabit and 10 Gigabit data cards
• Ethernet options for Layer 1 transport using Gigabit Ethernet and 10 Gigabit Ethernet crossponder cards
• Ethernet options for Layer 2 protected and unprotected data ring circuits using Gigabit Ethernet and 10 Gigabit Ethernet crossponder cards
• Provision incoming Class of Service (CoS) marking by port and by customer VLAN and incoming traffic shaping
• General queuing theory and Quality of Service as implemented in the Gigabit Ethernet and 10 Gigabit Ethernet crossponder cards
• Configure provisionable patch cords between TDM and DWDM shelves, create a TDM network through the DWDM nodes, and show the integrated circuit records
• ADM-10G time division multiplexing options for data and how to configure both dual and single card subnetworks within the DWDM and install DS3 and GigE circuits

Who Should Attend

Network professionals including designers, implementation staff, network operations center personnel, and support staff members who are involved with the deployment, operations, and maintenance of the Cisco ONS 15454 MSTP system.

Course Outline

1. Cisco ONS 15454 Product Overview

2. Safety

3. CTC Operations

4. DWDM Node Turn-Up

5. Manual Multiring

6. WXC-Based Mesh Network

7. Provisionable Patch Cords and Optical Client Circuits

8. General Review of Data

9. Cisco ONS 15454 MSTP Data Card Overview

10. G.709 Encapsulation

11. 2.5G Transponders and Encapsulation Options

12. GFP G.7041

13. 2.5G and 10G DME Cards and Encapsulation Options

14. Ethernet and VLANs

15. 10GE-XP and GE-XP Cards, Settings, and Circuits Layer 1

16. Crossponder Gigabit Ethernet Y-Cable Protection

17. Quality of Service (QoS)

18. XP E Cards Protected Ring, Incoming CoS Marking by Port and by Customer VLAN, and Outgoing QoS

19. ADM-10G Installation and Settings for Dual and Single Subnetworks

20. ADM-10G Circuits for TDM (DS3 Circuits)

21. ADM-10G Circuits for Data (Gig-E Circuits)

Labs

Lab 1: Configure Cisco Transport Controller (CTC) and View Network

Lab 2: Configure Six-Node Mesh Network

Lab 3: Install PPC and OC48 TDM Network through DWDM

Lab 4: Install 2.5G Transponders and Data Circuits

Lab 5: Install 2.5G and 10G DME Data Cards and Circuits

Lab 6: Install 10GTE-XP, GE-XP Cards, and Layer 1 Circuits

Lab 7: Configure 10GE-XP and GE-XP Y-cable protection

Lab 8: Install 10GE-XP and GE-XP Layer 2 Ring and Circuit

Demonstration: QoS and Protection Switching in Action

Lab 9: Install ADM10G Single and Dual Subnetworks

Lab10: Install ADM10G Protection

Lab11: Install ADM10G TDM Circuits Using DS3

Lab12: Install ADM10G Data Circuits Using Gig-E

More Seminar Information

OneSource Professional Training Solutions, Inc. Delivery Method  On-Site Training Also Available As  Seminar