<< Return To Seminar Description
Find a Seminar on TrainingAndSeminars.com
 

Principles of Bearings and Lubrication & Shaft Alignment
National Technology Transfer, Inc.


Delivery Method
Seminar
Seminar

Target Audience
Mechanics, Maintenance, Technicians, Energy management personnel, many others...

Summary
Participants of this bearings, lubrication and shaft alignment seminar learn to create specifications to purchase, install, maintain and repair bearing based systems

Description/Agenda

If your machinery is misaligned by only a few thousandths of an inch, your plant energy bill may be significantly higher than necessary. Proper alignment and lubrication of rotating machinery can not only help cut your energy costs, but it can also increase the “in-production” time of your equipment, lower your maintenance costs and increase bearing life. Participants of this bearings, lubrication and shaft alignment seminar learn to create specifications to purchase, install, maintain and repair bearing based systems. In the shaft alignment seminar, learn how to align any type of machinery which will result in a significant reduction in both operating and energy costs. Gain the skill set to extend the life of rotating equipment

Audience

People who will benefit from attending this seminar include:

  • Mechanics
  • Maintenance Technicians
  • Energy management personnel
  • Plant & facility maintenance technicians
  • Building engineers
  • Building managers & superintendents
  • Plant & facility managers
  • Stationary engineers
  • Owners & managers

What You'll Learn

Topics covered during this training include:

  • Installation and maintenance methods
  • Determine proper tensions
  • Correct alignment procedures
  • Proper lubrication methods and bearing selection
  • Spot symptoms of failure
  • Select the appropriate remedy
  • Align two pieces of rotating machinery
  • Energy saving techniques
  • Recognize and correct piping induced stress problems
  • Correct soft foot and check runout
  • Symptoms of misaligned rotating machinery

Workshop Agenda

Power-transmission physics

  • Basic concepts
  • The relationship between power, speed and torque
  • Calculate the linear velocity of a rotating component
  • Calculate speed ratio
  • Efficiency and service factors

Bearings

  • Types and terms
  • Installation and maintenance of bearings
  • Troubleshoot bearing failures
  • Select bearings
  • Shaft and housing fits
  • Bearing materials of construction
  • Types and installation of precision ball bearings
  • Tapered roller bearings

Lubrication

  • Select the right lubricant
  • The right lubrication method
  • Terminology
  • Properties
  • How to determine the required amount of lubricant
  • Test procedures
  • Flash and fire points
  • Bearing operating environment
  • Method to apply fluid lubricants

Couplings and Alignment

  • Selecting a coupling
  • Energy savings
  • Shaft centerlines
  • Shaft alignment process and its importance
  • Different types of soft foot
  • Shaft versus coupling alignment
  • Different types of flexible couplings
  • Coupling installation and interference fit
  • Comparison of couplings

Power-Transmission Formulas

  • Conversions

The Importance of Alignment

  • Align two pieces of rotating machinery
  • Correct soft foot
  • Check run out
  • Computer software programs
  • Symptoms of misaligned rotating machinery
  • Recognize and correct piping induced stress problems
  • Tools and techniques to control lateral movement of machinery
  • Alignment accuracy
  • Measure misalignment
  • Measure alignment with different coupling types
  • Checking alignment
  • Measure alignment
  • Advantages and disadvantages of alignment systems on the market
    • Laser
    • LVDT
    • Electromechanical
    • CCD sensors

Hands-On Lab Exercises

  • Measure of run out
  • Measure and correct soft foot problems
  • Measure bracket sag and adjust shaft position measurements
  • Perform three common shaft position measurements
    • Face peripheral
    • Reverse indicator
    • Shaft to coupling spool

At the end of this seminar students will be able to:

  1. Perform proper lubrication methods and bearing selection
  2. Correctly use laser alignment technology
  3. Demonstrate installation and maintenance methods
  4. Utilize tools and techniques to control lateral movement of machinery

 

Dates and Locations

see all dates/locations

 

Frequently Asked
Questions

Payment Options
Bill Me/Invoice
Credit Card

Register
Online
Fax Form

Availability
Select a date from the list at the bottom of the page for specific information about that class.

Other Information
Seminar

All Date/Location Information


TrainingAndSeminars | site map | about us | contact | terms of use | privacy
© 2015 Reports Online. All rights reserved.