On-Site Training Marketplace > Industrial Training > Electrical On-Site Training

On-Site Training Seminars In the Electrical Category
 

Course Name

Course Provider

Summary

NFPA 70E Arc Flash Electrical Safety with Hands-On Practical Skills Training
 
National Technology Transfer, Inc.

This training instructs participants on the electrical safety skills needed to perform routine electrical maintenance tasks at less than 1000 volts just as they would in the field.
 

2012 NFPA 70E/ Arc Flash Electrical Safety
 
National Technology Transfer, Inc.

Our essential two-day NFPA 70E/Arc Flash Electrical Safety course is the basis for more advanced electrical safety courses
 

2012 NFPA 70E/ Arc Flash Electrical Safety with Electrical Safety Practical Skills
 
National Technology Transfer, Inc.

Review the current OSHA standards that apply to your facility and the effects of the NFPA 70E standards on your high voltage areas
 

2012 NFPA 70E/ Arc Flash Electrical Safety with Utilization of High Voltage
 
National Technology Transfer, Inc.

This additional third-day course, Utilization of High Voltage, is a good option to add to our essential two-day NFPA 70E/Arc Flash Electrical Safety course
 

Advanced Electrical Troubleshooting
 
TPC Trainco

This 2-day intensive course is for electrical maintenance workers looking to gain an in-depth, hands-on understanding of complex control circuits.
 

Arc Flash Electrical Safety NFPA 70E with Skills & Certification
 
TPC Trainco

A 3-Day "Hands-On" Course Based on the NFPA 70E Standard for Electrical Safety in the Workplace - New: Includes Discussions on Changes for 2012!
 

Arc Flash Electrical Safety NFPA 70E®
 
TTC - Technical Training Classes

The course is designed to help companies fulfill their legal requirements relative to OSHA 29 CFR Part 1910, Subpart S Electrical, and NFPA 70E® "Standard for Electrical Safety in the Workplace®"
 

Arc Flash Electrical Safety NFPA 70E®
 
TPC Trainco

A 2-Day Training Course Based on the NFPA 70E® Standard for Electrical Safety in the Workplace®
 

Arc Flash Electrical Safety NFPA Z462®
 
Canadian Trainco

This training course is designed to save lives, prevent disabling injuries, and prevent damage to plants, building and equipment.
 

ArcSafe Certification / Arc Flash Electrical Safety NFPA 70E®
 
TTC - Technical Training Classes

We realize that there is no official certification for electrical safety. Our ArcSafe Certification is documented proof from us that your employee has had the required training outlined in OSHA regulations and NFPA 70E® standards.
 

Basic Electricity for the Non-Electrician
 
Canadian Trainco

This course is specifically designed for maintenance technicians and other non-electrical personnel working in industrial plants and commercial buildings.
 

Basic Electricty for Non-Electricians
 
TPC Trainco

This course is designed for anyone who needs to understand basic electricity in order to improve efficiencies and uptime at their industrial plants and large building facilities. During this seminar attendees will perform basic electrical “hands-on” maintenance tasks.
 

Basic Fiber Optics Training
 
National Technology Transfer, Inc.

Maintain Your Own Fiber Optic Network and Learn the Skills to Minimize Network Downtime!
Optional ACES Certification Exam Available!
 

Basic Instrumentation Process Measurement & Control
 
TPC Trainco

Learn how to get desired results from your equipment and do away with the “Replace-part-when-broken” maintenance strategy
 

Basics of Industrial Electricity
 
National Technology Transfer, Inc.

Learn the Nature and Applications of Industrial Electricity. Cross-train Nonelectrical Tradespeople with this Newly Revised and Updated Seminar
 

Basics of Industrial Electricity (2-Day)
 
National Technology Transfer, Inc.

Learn Electrical Essentials and How to Safely Work on Industrial Electrical Equipment
 

Electric Motors & Control Circuits
 
TPC Trainco

A practical course for maintenance personnel working in industrial plants, public facilities and commercial buildings! This course is designed to help maintenance people identify what the real issue is when a motor burns out and how to prevent it from happening again. It involves understanding the control of the motor as well as the motor itself.
 

Electric Motors and Motor Control Circuits
 
Canadian Trainco

This course is designed to help maintenance people identify what the real issue is when a motor burns out and how to prevent it from happening again.
 

Electric Motors: Understanding & Troubleshooting
 
National Technology Transfer, Inc.

Get the Basics of Electrical Motor Operation, Maintenance, and Troubleshooting. Maintain the Performance of the Electric Motors You Work Around Every Day!
 

Electrical Diagrams Schematics & Drawings
 
TPC Trainco

A 2-Day Course for Everyone in Industrial Plants, Public Facilities and Commercial Buildings.
 

Electrical Ladder Drawings, Schematics and Diagrams
 
Canadian Trainco

A 2-Day Course to Help You Understand All the Electrical Languages that Run your Facility and Equipment
 

Electrical License Prep
 
TTC - Technical Training Classes

This class will give you the knowledge and confidence to achieve a passing score on the difficult Journeyman or Master Electrical Licensing Exam
 

Electrical PM & Best Practices
 
TPC Trainco

Learn simple preventive maintenance practices to keep your plant or facility operating at peak efficiency!
 

Electrical Print Reading From Construction to Control
 
National Technology Transfer, Inc.

Learn to interpret architectural electrical drawings electrical blueprints, diagrams, and schematics!
 

Electrical Safety 70E® & Arc Flash Protection
 
TPC Trainco

A 2-Day Course Designed to Save Lives, Eliminate Injuries, and Prevent Damage to Plants, Building and Equipment - a Perennial Favorite for Students, now Including NFPA 70E® and Arc Flash Protection!
 

Electrical Safety for Electric Power Generation Transmission and Distribution
 
National Technology Transfer, Inc.

Provide Safety Information for OSHA Electrical Safety-Related Work Practices 29 CFR 1910.269.
Protect Yourself, Your Employees, and Your Company
 

Electrical Safety High Voltage Qualified
 
e-Hazard

In this training, attendees learn what it means to be HV qualified and what electrical tasks may only be performed by a qualified person.
 

Electrical Safety Low Voltage Qualified NFPA 70E - 8 Hours
 
e-Hazard

This practical one-day course provides a comprehensive understanding of safe electrical workplace practices in accordance with OSHA and NFPA 70E regulations and guidelines.
 

Electrical Safety Training (Arc Flash) NFPA 70E® 2018 Edition
 
National Technology Transfer, Inc.

The ONLY two day, "Hands-On" skill based seminar that covers everything you and your staff need to know about the significant changes being made to NFPA 70E®
 

Electrical Troubleshooting & Preventive Maintenance
 
TPC Trainco

A 2-Day Hands-On Course for Building, Plant & Facility Maintenance. Day 1 - Electrical Circuits, Motors & Power Distribution. Day 2 - Power Quality, Lighting, PLC's & VFD's
 

Electrical Troubleshooting & Preventive Maintenance
 
Canadian Trainco

Teaching students common-sense electrical troubleshooting techniques so they can keep their facilities and equipment up and running is the primary goal of this seminar. Learning how to protect themselves from serious injury while doing it is a vitally important bonus.
 

Electrical Workshop - Basics to Troubleshooting
 
TPC Trainco

This four-day workshop provides an intensive training experience that covers the basics of electricity all the way through troubleshooting a facility's own electrical systems.
 

Fundamentals of Programmable Logic Controllers
 
National Technology Transfer, Inc.

Learn About PLCs from a Single 3-Day Seminar—Plus Receive LogixPro® PLC Simulation Software FREE!
 

Fundamentals of Programmable Logic Controllers and PLC Automation Systems
 
National Technology Transfer, Inc.

An Introduction to PLCs Followed by Advanced Training in PLC Troubleshooting
 

Generators & Emergency Power
 
TPC Trainco

Designed to help you understand the types, applications, operations, maintenance and testing of on-site power generator systems
 

Generators & Emergency Power
 
Canadian Trainco

A 2-Day Course for Building, Plant & Facility Emergency Preparedness - Designed to help you understand the types, applications, operations, maintenance and testing of on site power generator systems
 

Grounding & Bonding of Electrical Systems
 
National Technology Transfer, Inc.

You will learn protection fundamentals and performance requirements that are essential for electrical installation, design and inspection.
 

Grounding & Bonding of Electrical Systems
 
TPC Trainco

An in-depth 2-day seminar covering the most important but least understood articles of the NEC. Protect your employees from shock and your plant and equipment from heat or fire.
 

Grounding and Bonding of Electrical Systems
 
National Technology Transfer, Inc.

Changes in the 2008 NEC® for Grounding and Bonding - Learn the New Requirements and How to Avoid Grounding Problems!
 

Hazardous Location Electrical Systems with Grounding & Bonding
 
National Technology Transfer, Inc.

Learn strong grounding and bonding fundamentals and performance requirements essential for electrical installation, design and inspection, while maintaining the highest level of electrical safety for persons and property.
 

High Voltage Electrical Safety for Power GTD - 29 CFR 1910.269
 
TPC Trainco

The purpose of the course is to provide the student with the knowledge and understanding of safe electrical work practices and procedures, especially as it relates to power generation, transmission and distribution systems
 

Industrial Electricity & Troubleshooting Electrical Control Circuits
 
National Technology Transfer, Inc.

Learn the Nature and Applications of Industrial Electricity and How to Wire, Operate, and Troubleshoot a Circuit, All in One Combination Seminar!
 

Introduction to Instrumentation and Process Control
 
National Technology Transfer, Inc.

Training Process Control Personnel Can Save You Time and Money—Become More Efficient at Troubleshooting and Calibrating Process Control Equipment!
 

Ladder Diagrams and Schematics for Maintenance Technicians
 
TTC - Technical Training Classes

Students will complete various drawing exercises, which will progressively develop their skill level and enhance their ability to follow and troubleshoot control circuits.
 

Motor Controls for Maintenance Technicians
 
TTC - Technical Training Classes

Students will construct and test common motor control circuit. This will give them an understanding for how the circuits and components work, and a better understanding of how to quickly troubleshoot problems.
 

Motor Controls Workshop
 
TTC - Technical Training Classes

This combination of our Ladder Diagrams/Schematics and Motor Controls for Maintenance Technicians courses is designed so there are no skill gaps in the students knowledge or understanding of motor controls and components.
 

National Fire Alarm Code / NICET I & II (5-Day)
 
National Technology Transfer, Inc.

Learn to Troubleshoot Fire-Detection Systems—Improve Reliability and AchieveMaximum Safety and Compliance!
 

NFPA 70E/Arc Flash Electrical Safety
 
National Technology Transfer, Inc.

Gain Electrical Safety Information Based on OSHA Electrical Safety-Related Work Practices Standard 29 CFR 1910.331 Through 1910.335 and NFPA 70E
 

NFPA 70E/Arc Flash Electrical Safety w/ Intro to Arc Flash Analysis
 
National Technology Transfer, Inc.

Learn NFPA 70E to meet OSHA Electrical Safety Requirements!
 

NFPA 70E: Arc Flash Electrical Safety & 2017 National Electrical Code®
 
National Technology Transfer, Inc.

In this NFPA training seminar we combine installation with safe work practices - 2017 NEC® & 2018 NFPA 70E®
 

NFPA 72: National Fire Alarm & Signaling Code
 
National Technology Transfer, Inc.

Participants of this NFPA 72 training will learn the fundamentals of fire alarm systems, fire alarm equipment for dwelling units, initiating devices, emergency communication systems (including mass notification), and more.
 

PLC Programming & Applications - 2 Day Hands-On
 
Canadian Trainco

An Intensive, 2-day "Hands-on" Training Course. Gain the confidence you need to modify and create your own PLC programs
 

PLC Programming & Applications: 2 Day Hands-On
 
TPC Trainco

Gain the confidence you need to modify and create your own PLC programs
 

PLC Training Seminar
 
The Business Industrial Network

Designed for industrial maintenance, takes you to understanding and troubleshooting level. You will be able to identify and write a simple best practice program IEC 61131-3 standards.
 

PLC Workshop: From Introduction to Application - 4-Day Hands-On
 
TPC Trainco

This PLC Programming Workshop combines our introductory PLC course with our programming and applications course to provide the student a complete PLC education from a basic introduction on how PLC's work to providing them the knowledge, confidence and ability to modify or create their own PLC programs.
 

PLC's for Non-Programmers
 
TPC Trainco

This course is perfect for multi-craft maintenance technicians, electricians, or other non-programmers who need a general understanding of PLC’s. This seminar converts the seemingly complex world of PLC’s into practical lessons the average maintenance person can understand. We’ve taken information from thousands of pages of manufacturers’ technical manuals, combined it with twenty years of experience and a practical real world philosophy to give you simple, clear, and concise solutions to your everyday PLC problems.
 

PLCs for Non-Programmers - 2 Day Hands-On
 
Canadian Trainco

A 2 Day Training Course Designed to take the mystery out of working with Programmable Logic Controllers ( PLCs )
 

Pump Repair and Maintenance
 
TPC Trainco

Establish PM for Your Pumps and Learn the Fundamentals of On Site Repair to Save Money
 

Standby Generators & Emergency Power
 
TPC Trainco

A 2-day seminar designed to help you understand the types, applications, operation, maintenance and testing of onsite power generation systems.
 

Troubleshooting Electrical Control Circuits
 
National Technology Transfer, Inc.

Learn to Wire, Operate, and Troubleshoot a Circuit Before Noon, Day 1—Sharpen and Improve These Skills With Continued Hands-On Training!
 

Troubleshooting Mechanical Drive Systems & Rotating Equipment
 
TPC Trainco

A Practical Course Designed for Building Facility and Industrial Plant Maintenance Technicians
 

Troubleshooting Workshop
 
TTC - Technical Training Classes

This class will make a huge difference in your maintenance staff's ability to quickly and accurately diagnose and repair problems.
 

Variable Frequency Drive Advanced Applications
 
TPC Trainco

This 2 day seminar is invaluable for technicians needing to know about drives in an industrial and process control environment.
 

Variable Frequency Drives
 
Canadian Trainco

This seminar will teach you how to troubleshoot common VFD problems, take care of your own equipment, and avoid costly repairs or service calls.
 

Variable Frequency Drives
 
National Technology Transfer, Inc.

Improve Reliability and Extend the Life of Your Drives With Proper Installation and Maintenance!
 

Variable Frequency Drives
 
TPC Trainco

Reduce Your Dependence on Outside Service Contractors!A practical 2-day seminar for maintenance technicians
 

Wiring and Troubleshooting Residential Electrical Systems
 
TPC Trainco

A two-day hands-on course for wiring and troubleshooting that will provide students everything they need to know to safely and properly work on residential electrical systems.